Common-Rail
Equipment for testing Common Rail injectors
DL-CR10030.
  • Description
  • Package contents
  • Installation scheme

DL-CR10030. Basic equipment kit for testing CR injectors

The basic equipment kit is designed to test Common Rail injectors of different manufacturers (Bosch, Denso, Delphi, VDO (Siemens) Cummins, Caterpillar, AZPI.

Basic equipment kits for testing CR injectors using the measuring unit
A kit of basic equipment for testing CR injectors without a CR-tester DL-CR10020
A kit of basic equipment for testing CR injectors without a CR-tester and injection pump CP3 DL-CR00088 DL-CR10021
A kit of basic equipment for testing CR injectors with the FLAGMAN CRT-5000 controller DL-CR10030
A kit of basic equipment for testing the CR injectors with the FLAGMAN CRT-5000 controller without the CP3 DL-CR00088 injection pump kit DL-CR10031
Complete kits of basic equipment for testing the CR injectors with the measuring unit, as well as with the possibility of connection to the electronic measuring unit FLAGMAN-MUFI-CR and retrofitting with the FLAGMAN Code coding system
A kit of basic equipment for testing CR injectors with the FLAGMAN CRT-5040 controller DL-CR10040
A kit of basic equipment for testing the CR injectors with the FLAGMAN CRT-5040 controller without the CP3 DL-CR00088 injection pump kit DL-CR10041

The injection pump kit DL-CR00088 is used with a working pressure of 1800 bar.

The injection pump kit DL-CR00139 is used with a working pressure of 2400 Bar and is available on request. Also, when installing DL-CR00139 in the basic equipment kit, the sensor and pressure regulator must be replaced by 2400 Bar and 2200 Bar, respectively.

Equipment Kit for testing CR injectors, DL-CR10030
Name Article Amount
Electronic part
 Common Rail injector testing controller CRT-5000 1 pc
Extension cable for injectors: socket “Injector” — 1.5 m DL-CR10032 1 pc
Cable for connecting high-pressure regulators HP1, HP2, HP3: “REG HP” socket – 2.0 m. DL-CR10033 1 pc
Cable for connection of low pressure regulators LP1, LP2: “REG LP” socket – 2.0 m. DL-CR10034 1 pc
Cable for connection of a pressure sensor “Bosch” type 1: socket “Sensor” – 2,0 m. DL-CR10035 1 pc
Cable for connection of the “Bosch” pressure sensor type 2: “Sensor” socket – 2.0 m. DL-CR10036 1 pc
Connectors for self-made cables in the sockets: Protection, Tank t C, Reg t C, Cycle, Pump, Invertor, Rpm, DL-CR10037 7 pcs
Reed switch for protection connection: “Protection” socket DL-CR10038 1 pc
Temperature sensor for monitoring the temperature of the liquid in the tank: socket “Tank t C” DL-CR10039 1 pc
* Temperature sensor for monitoring the backflow temperature of the injectors t C DL-CR10042 4 pc
Cable for BOSCH injectors (universal) DL-CR10043 1 pc
Cable for Delphi (C2i, C3i) injectors DL-CR10044 1 pc
Cable for Delphi (C3i) injectors DL-CR10045 1 pc
Cable for BOSCH,SIEMENS injectors DL-CR10046 1 pc
 BOSCH injector cable DL-CR10047 1 pc
Cable for truck injectors “cap” type DL-CR10048 1 pc
Cable for truck injectors universal type DL-CR10049 1 pc
Power supply cable 220 V 1 pc
 USB cable 1 pc
Manual 1 pc
Software Cascade 1 pc
Mechanical part
Pressure sensor 1800 bar DL-CR10050 1 pc
*Pressure sensor 2200 bar DL-CR10052 1 pc
*Pressure sensor 2400 bar DL-CR10053 1 pc
Pressure regulator 1800 bar DL-CR10051 1 pc
*Pressure regulator 2200 bar DL-CR10054 1 pc
*Pressure regulator 2700 bar DL-CR10055 1 pc
Pressure accumulator “Rail” small DL-CR30180 1 pc
Pressure accumulator “Rail” for 2 regulators DL-CR30181 1 pc
*Pressure accumulator “Rail” for 2 regulators with cooling DL-CR30188 1 pc
*Safety valve for pressure accumulator 1800 bar DL-CR10056 1 pc
*Safety valve for pressure accumulator 2400 bar DL-CR10057 1 pc
Plug М14 DL-CR50162 6 pcs
High pressure lines M14 X 14 X 400 mm for injectors DL-TVD41414 4 pcs
High pressure line M14 X 14 X 300 mm for manometer DL-TVD31414 1 pc
High pressure line M14 X 14 X 300 mm for connection to “Rail” DL-TVD31414 1 pc
Connector  М14 to М12 DL-UNI50083 1 pc
Fixing frame with injectors holders DL-CR10015 1 pc
Set of sleeves for dia. 17 mm / 18.9 mm / 19.1 mm / 20.9 mm for 4 pieces DL-UNI50161 1 set
Holder for nozzles 9 mm DL-UNI30997 2 pcs
Bracket for fixing frame with injector holders DL-CR10025 1 pc
Teflon line for connecting injectors dia. 6 mm P1004 16 m
Plug instead of pressure regulator DL-UNI30497 2 pcs
Plug instead of safety valve DL-CR30493 1 pc
DENSO backflow connection kit- banjo fitting, M8 x 1 mm bolt, copper washers 2 pcs DL-CR10060 4 kits
Backflow connection for “rail” (banjo 12 mm + bolt M12 + rubber-met. washers) DL-CR10062 2 sets
Adapter set for CR injector backflow connection DL-24CRM 1 комп
Fixing bracket DL-CR10028 1 pc
Set of fasteners DL-CR10063 1 pc
Safety screen 6mm polycarbonate DL-CR10006 1 pc
Defoamers DL-UNI30156 8 pcs
Quick connectors to the defoamers 34-RL310602 8 pcs
Manometer 0-2000 bar DL-CR14P2500 1 pc
Connector 1/2″ X М14 (for manometer) DL-UNI30287 1 pc
Bracket for manometer DL-KM2500 1 pc
Set of equipment for high pressure pump CP3

DL-CR00088 1800 Bar

HPFP СР-3 1800 bar DHPFPL-CR10088 1 pc
High pressure line М14 Х 14 X 400 mm for HPFP DL-TVD51414 1 pc
Adapter for mounting the pump on the bracket (diameter 107 mm) DL-UNI30428 1 pc
Coupling for connecting the pump to the drive DL-M24 1 pc
Rubber hose diam.8 mm DL-CR10064 2 m
Fitting (banjo 12 mm + bolt М12 + rubber.metal washers ) for HPFP DL-CR10062 2 sets
Clamps 13 mm for rubber hoses F8mm DL-CR10066 4 pcs
*Set of equipment for high pressure pump CP3 DL-CR00139

2400 bar

HPFP СР-3 2400 bar DL-CR10139 1 pc
High pressure line М14 Х 14 X 400 mm for HPFP DL-TVD51414 1 pc
Adapter for mounting the pump on the bracket (diameter 107 mm) DL-UNI30428 1 pc
Coupling for connecting the pump to the drive DL-M24 1 pc
Rubber hose diam.8 mm DL-CR10064 2 m
Fitting (banjo 12 mm + bolt М12 + rubber.metal washers ) for HPFP DL-CR10062 2 sets
Clamps 13 mm for rubber hoses F8mm DL-CR10066 4 pcs

*Optional !