Common-Rail
Equipment for testing Common Rail injectors
DL-CR31257KIT
  • Description
  • Package contents
  • Extra

DL-CR31257KIT. Pressure accumulator (rail) for testing injectors and pumps with cooling (for 2 pressure regulators)

Pressure accumulator (Rail) for testing pumps СР1, СР2, СР3, СР4, Delphi, Denso and CR injectors
The rail has cooling channels for improved thermal stability during  testing
nozzles and pumps of the Common-Rail system

The rail has threaded holes for:

pressure sensor connection (M18x1.5)
pressure regulator connection (2 holes M24x1.5mm)
connections for backflow fittings and plugs (4 holes 1/8″)
fitting for connecting a hose or tube for rail cooling and plugs (5 holes 1/4 “)
supply and output of high pressure fluid from the rail (2 holes M24x1.5mm)
supply and output of high pressure liquid from the rail on the side (2 holes M14x1.5mm)
rail mounts (4 blind holes M8)

  • Pressure accumulator for 2x PR
  • DL-CR30497 Plug (М24х1,5mm) instead of a pressure controller (1 PC.)
  • DL-UNI30162 Plug (M18 x 1,5mm) instead of a pressure sensor (1 PC.)
  • DL-UNI30020 DL-Fitting (1/4″х8мм) inlet and outlet for cooling TJ (2 PCs.)
  • Dl-UNI30202 Plug (1/4″) of the cooling channel (3 PCs.)
  • DL-UNI30293 Fitting (1/8″х8мм) withdrawal reverse drain from RD (1 PC.)
  • DL-UNI30203 Plug (1/8″) under the rubber strip in the back flow channel (1 PCs.)
  • DL-UNI31082 Plug (1/8″) slotted channel back flow from the ends of the rail (2 PCs)
  • DL-UNI31041 Fitting (М24х1,5mm X М14х1,5 mm) for TVD (1 PC.)
  • DL-UNI31039 Plug (M24x1.5 mm) for the VD channel (1 pc.)
  • DL-UNI31535 Fitting (M14x1.5 X M14x1.5 mm) for TV (2 pcs.)
  • DL-UNI50271 Plug for the DL-UNI31535 fitting (1 pc.)

ATTENTION! Regulators and pressure sensor are not included!