New products
DL-GR7400
  • Description
  • Package contents
  • Additional equipment

DL-GR7400 Grinding machine for nozzle needles with rotation speed indicators in %

 


The machine DL-GR7400 is used to sharpen the nozzle needles and other bodies of rotation.
The machine is controlled by a PWM regulators.
Rotation speed of the spindle and the machined body is adjusted by rotary knobs located on the control panel.
The brightness adjust using the rotary knob located at the top of the control panel.On the control panel there is a switch for the general power supply of the machine and three power switches for each electric motor of the corresponding drive and the lower illumination.
On the backside of the machine, there is a connector for the power cable 220V, two 220V sockets and a 12V socket for connecting a monitor.
On the front side of the machine is a 12 Volt connector for connecting the power cable of the motor to drive the bodies of rotation.

TECHNICAL DATA
The maximum spindle rotation speed is 7400 rpm
The maximum speed of the sharpened body is 1000 rpm
Main motor power supply voltage is 36 V.
Power supply voltage of the electric motor drive – 12 V.
Grinding wheel – fine-grained electrocorundum

  • Grinding machine
  • Drive pulley with an inner diameter of 3 mm
  • Drive pulley with an inner diameter of 4 mm
  • Drive pulley with an inner diameter of 7 mm
  • Grinding wheel repair pen
  • Power supply cable 220 Volt
  • Manual
  • НКУ DL-GR7300

Additional equipment to DL-GR7500

  • DL-UNI20200 Abrasive stone (wheel), grid 400
  • DL-UNI20201 Abrasive stone (wheel), grid 200
  • DL-UNI20202 Abrasive stone (wheel), grid 100
  • DL-GR1050 Stone(wheel) holder
  • DL-GR1060 Shaft for balancing stone (wheel)
  • DL-GR1070 Balancing device
  • DL-GR1080 Angle Measuring Kit

DL-GR1080 Angle Measuring Kit

Scope of delivery:
1. Electronic protractor
2. Bracket for protractor
3. Shaft NG31249
4. Screw set М4 (3pcs)

Technical data:
1. Measurment range: 0-360 degrees
2. Resolution: 0,05 degrees
3. Accuracy : +- 0,2 degrees
4. Error : 0,05 degrees
5. Battery : 3V CR20032
6. Battery life: 1 year

DL-NG31263 Caliber for setting the angle of 60 degrees (ordered separately)

 

DL-UNI20025
Industrial microscope with monitor, elongated stand and backlight

The microscope has a clear image and high resolution

Technical data:

1. Sensor: Panasonic 1/2. 3 in.14 MP
2. Image format: jpg, png, tiff
3. Image resolution: 1280×1024(for HDMI), 1280×1024(for VGA)
4. Video format: MP4
5. Video resolution:720pHD/1280×1024
6. Frame rate: 60FPS
7. Color balance: Auto
8. Light:Auto
9. Menu language:english
10.Magnification ratio: 8-100X
11.Focus adjustment: on the lens
12.Working distance: 55 mm-130 mm
13.Line of sight: 2,4 mm-32 mm
14.The connection of the lens and power adapter: thread F25
15.Power supply: 5V, 2А
16.Power adapter size: 70х50х50 mm
17.Lens dimentions: 115 mm (L) * 40 mm (dia)
18.Power adapter weight: 210g
19.Lens Weight: 208 g
20.Port: HDMI/VGA

Scope of delivery:

1. DL-UNI20016 Microscope electronic industrial with power supply.
2. DL-UNI20019 Tripod holder for the microscope
3. DL-UNI20018 Diode lamp for the microscope.
4. DL-UNI20021 Monitor
5. DL-UNI20022 Monitor holder with a diameter of 25 mm

ATTENTION! All the equipment included in the delivery is sold also separately!

DL-UNI20030
Industrial microscope with monitor, elongated stand and backlight
Microscope with high resolution and clear image

 

Product details:
1. Sensor: Panasonic 1/2. 3 in.14 MP
2. Image format: jpg, png, tiff
3. Image resolution: 4320*3240(for HDMI), 1080*1920(for USB)
4. Video format: MP4
5. Video resolution USB:1920*1080
6. Frame rate: 60FPS
7. Color balance: Auto
8. Light:Auto
9. Menu language:english
10.Magnification ratio: 8-100X
11.Focus adjustment: on the lens
12.Working distance: 55 mm-130 mm
13.Line of sight: 2,4 mm-32 mm
14.The connection of the lens and power adapter: thread F25
15.Power supply: 5V, 2А
16.Power adapter size: 70х50х50 mm
17.Lens dimentions: 115 mm (L) * 40 mm (dia)
18.Power adapter weight: 210g
19.Lens Weight: 208 g
20.Port: HDMI/VGA

Scope of delivery:

1. DL-UNI20010 Microscope electronic industrial with power supply.
2. DL-UNI20019 Tripod holder for the microscope
3. DL-UNI20018 Diode lamp for the microscope.
4. DL-UNI20021 Monitor
5. DL-UNI20022 Monitor holder with a diameter of 25 mm

ATTENTION! All the equipment included in the delivery is sold also separately!

DL-UNI20200 Abrasive stone, grid 400

DL-UNI20201 Abrasive stone, grid 200

DL-UNI20202 Abrasive stone, grid 100

DL-GR1050 Stone (wheel) holder

DL-GR1060 Ось для балансировки камня

DL-GR1060 Shaft for balancing stone(wheel)

(Set does not include stone and stone holder)