Filters and filter elements
Cleaning block
  • Description
  • Package contents
  • Extra

Cleaning block. Liquid Vapor Filtration Unit

The purification unit is designed to filter liquid vapors generated in the working compartment of equipment for testing fuel equipment.

Principle of operation:
Polluted air is sucked through the intake pipe into the lower chamber and, under the influence of centrifugal forces, enters further into the separation chamber, where, circulating through the labyrinth system, the main purification of air from oil vapors and emulsions takes place. Further, the air passes into the upper chamber and, passing through another filter element, returns to the working room. The collected liquid flows back into the working compartment through the drain tube.

Power supply: standard single-phase 230 V, 50 Hz or three-phase 230/400 V, 50 Hz.
Electric motor power 0.224 kW – 0.274 kW.
Overall dimensions (length x width x height), mm 412 x 412 x 388.
Weight – 25 kg.
The number of revolutions of the fan on the electric motor: 2500 rpm-2756 rpm.
Maximum productivity at (P=100 Ra) 1000 m3h – 1325 m3/h
Maximum pressure 714 Pa.
The maximum temperature of the filtered mist (air) is 50°.